The raw material of aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, which is rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. Then, according to the purpose, it is longitudinally cut into aluminum strips of different widths by a longitudinal shear machine.
The alloy grades commonly used for aluminum strips include 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011, etc. Commonly used states include O state and H state. O represents the soft state, and H represents the hard state. The degree of softness and hardness, as well as the degree of annealing, can be represented by numbers after O and H.
The specific uses of aluminum strip mainly include: transformer aluminum strip (transformer aluminum foil), aluminum strip for high-frequency welding hollow aluminum strip, aluminum strip for fin heat sink, aluminum strip for cable, aluminum strip for stamping, aluminum strip for aluminum edge strip, etc.
The categories of aluminum alloy strips include: pure aluminum strip, transformer aluminum strip, superhard aluminum strip, fully soft aluminum strip, semi hard aluminum strip, and rust resistant aluminum strip.
Aluminum tape has many uses, such as aluminum plastic composite pipes, cables, optical cables, transformers, heaters, louvers, and so on.
1060 requires high corrosion resistance and formability, but low strength requirements, and chemical equipment is its typical use.
1100 is used for processing parts that require good formability and high corrosion resistance but do not require high strength, such as chemical products, food industry devices and storage containers, sheet metal processing parts, deep drawing or spinning concave vessels, welded components, heat exchangers, printed boards, nameplates, reflective devices.
3004 plate, thick plate, stretch tube. As long as the extruded tube is used for the entire aluminum can body, it requires higher components than 3003 alloy, chemical product production and storage devices, sheet metal processing parts, building baffles, cable ducts, sewers, and various lighting components.
3003 plates and strips. Foil material. Thick plate, stretch tube. Squeeze tube. Type. Great. Wire. Cold worked bars, cold worked wires, rivet wires, forgings, foils, and heat sink materials are mainly used for processing components that require good formability, high corrosion resistance, or good weldability, or for workpieces that require higher strength than 1 * * series alloys, such as tanks and tanks for transporting liquids, pressure tanks, storage devices, heat exchangers, chemical equipment, aircraft fuel tanks, oil ducts, reflective panels, kitchen equipment, etc, Washing machine cylinder body, rivets, welding wires.
5052 alloy has good formability, corrosion resistance, candlestick resistance, fatigue strength, and moderate static strength. It is used in the manufacturing of aircraft fuel tanks, oil pipes, as well as sheet metal parts for transportation vehicles and ships, as well as instruments, street lamp brackets and rivets, hardware products, etc.
